Why Nikon D750
becomes hot very quickly?
Dear friends,
First of all I would like to say D750 Is a good camera for video graphy
and for photography. The display is created for the purpose of video graphy.
That is why every videographer loves to have it. It has a rotatable display in
all angles. The reason behind overheating is recording in high ISO range.
Another reason is depth is also high in D750 display. This is always mistaken
that the body is overheating but it is the display that is overheating. Poor
battery can also make this happen. If you use third party software virus can
enter into camera thus results overheating. If you are feeling that your camera
is overheating you must switch off it and give it sometime to cool off. If you
are using it continuously the censor will be damaged.
How to Set Aperture on
Your Camera?
Dear friends,
In
many of the modes on your camera, the aperture value is set
automatically. On DSLRs and many point and shoot cameras there is a mode
called Aperture-priority mode that is typically marked with an “A” or “Av” on
the mode dial. By turning your mode dial to Aperture-priority, you take control
of the aperture setting and let the camera choose the appropriate shutter speed
in order to obtain a proper exposure. When in Aperture-priority mode, you
can adjust the aperture value throughout the entire range for the lens. So, now
you know that you can use a wider aperture setting (or, lower f-number) to get
more out of scenes where you want to stick with available light. Watch your
shutter speeds though. You don’t want to run out of the necessary amount of
light to maintain a minimum shutter speed. If your shutter speed drops
too low, you’ll need to open the up the aperture even further or increase the
sensitivity settings to a higher ISO value
No comments:
Post a Comment